Pattern of a cap 3 (Product code: 387123)

Fabric recommendations: thin knitted fabrics.

To sew this pattern you will need: satin braid.

We recommend the following seam allowances: all seams 1 cm.

For infants from 0 to 6 months. For cold or light bonnets, all allowances are made 0.5 cm and overcast to the front side. Finishing stitches are used on warm bonnets or bonnets that are put on under bonnets.

Patterns included:

Cap pattern 3

Cap tie pattern 3

Cut:

From the main fabric:

1. Cap 3 - 1 piece

2. Cap tie 3 - 1 piece

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

When sewing the parts together, pay attention to the notches - they must match!

1. Sew the darts of the cap. Neaten the seams and press them onto the side parts. Fold the right side of the satin tape with the wrong side of the cap and stitch the outer edge, fitting the cap. Bend the tape to the right side and topstitch.

2. Using the marks, make a fold on the base of the cap. Sew the inner edge of the tie to the wrong side of the cap. Fold the outer edge of the tie and stitch it into the stitching seam of the inner edge. Tie knots at the ends of the tie.

You can decorate girls' caps with various laces, bows and satin ribbons.