Pattern of a romper (Product code: 387119)

The pattern set includes:

Shelf pattern

Back pattern

The picture below shows the finished pattern:

We recommend adding the following seam allowances: all seams 0.5 cm.

For better sewing quality, allowances can be made 0.5 cm. Sew the product on an overlock with a width of 0.5 cm, without using stitching equipment.

From the main fabric:

From the main fabric:

Front – 2 parts

Back – 1 part (with fold)

We recommend the following fabrics for sewing: satin, calico.

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

When sewing the pieces together, pay attention to the notches - they should match!

1. Stitch and overcast the shoulder and upper seam of the sleeve from the front side. Iron the seam to the back.

2. Overcast the lower edge of the sleeve (from the front side).

3. Stitch and overcast the side and lower seam of the sleeve from the front side.

4. Overcast: the bottom edge, the sides and the neckline of the front and back from the front side.

You can decorate the romper with embroidery or iron-on applique.