Pattern of rompers (Product code: 387120)

The pattern set includes:

Front pattern

Back pattern

Sock pattern

Heel pattern

The picture below shows the pattern:

We recommend adding the following seam allowances: all seams 0.5 cm. Allowance for processing the back fastener 4 cm, front 3 cm.

For better sewing quality, allowances can be made 0.5 cm. Sew the product on an overlock machine with a width of 0.5 cm, without using stitching equipment.

The straps are designed to allow for growth.

Number of required parts:

From the main fabric:

Front – 2 parts

Back – 2 parts

Heel – 2 parts

Toe – 2 parts

We recommend the following fabrics for sewing: knitted fabrics.

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

When sewing parts, pay attention to the notches - they must match!

1. Sew the toe to the front (along the rounded area). Overcast the seam.

2. Sew the center front edge. Overcast the seam. Sew the center back seam. Overcast the seam. Sew and overcast the side seams.

3. Stitch and overcast the step edges.

4. Sew the heel (aligning the marks) to the lower edge of the back, to the lower edge of the front and toe. Neaten the heel seam in a circle.

5. Overcast the neckline allowances, armholes, and upper edges of the one-piece back facings with one stitch. Fold the back facing of the fastener to the front side and overcast the corners. Straighten the corners and turn the facing to the front side.

6. Process the front facing in the same way.

7. Fold the neck and armhole allowances to the wrong side and topstitch.