Baby Bonnet Pattern 1 (Product code: 387121)

The pattern set includes:

Pattern of the back of the cap

Pattern of the base of the cap

Pattern of the tie of the cap

The picture below shows the finished pattern that you will get after printing and assembling from A4 sheets:

We recommend adding the following seam allowances: for babies from 0 to 6 months. For cold or light bonnets, all allowances are made 0.5 cm and overcast to the front side. Finishing stitches are used on warm bonnets or bonnets that are put on lower bonnets.

For better sewing quality, allowances can be made 0.5 cm. Sew the product on an overlock machine with a width of 0.5 cm, without using stitching equipment.

You can decorate girls' caps with various laces, bows and satin ribbons.

Number of required parts:

From the main fabric:

Back of the cap – 1 piece

Base of the cap – 1 piece

Tie of the cap – 1 piece

We recommend the following fabrics for sewing: thin knitted fabrics.

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

When sewing parts, pay attention to the notches - they must match!

1. Sew the base of the cap and the back of the cap along the marks. Neaten the seams and topstitch onto the base of the cap. Fold half of the allowance of the outer edge of the base of the cap to the wrong side, then fold the second half of the allowance and topstitch.

2. Make a fold on the base of the cap along the marks. Sew the inner edge of the tie to the wrong side of the cap. Fold the outer edge of the tie and stitch it into the stitching seam of the inner edge. Tie knots at the ends of the tie.