Hoodie sewing pattern (Product code: 4231)

The pattern set includes:

Front piece pattern

Back piece pattern

Lower back piece pattern

Lower front piece pattern

Sleeve pattern

Cuff pattern

Hood pattern

Center hood piece pattern

Front facing pattern

Back neckline facing pattern

Recommended fabrics: dense knit fabrics, French terry, fleece.

You will also need: fusible interfacing; separating zipper (zipper length is indicated on the front piece pattern); decorative cord; 2 cord ends; 2 snaps; elastic tape 2.5 cm wide.

Recommended seam allowances: all seams – 1 cm; armhole, sleeve cap, neckline, lower edge of the hood – 0.7 cm; outer edge of the hood – 3 cm.

Required cutting pieces:

From main fabric:

1. Front – 2 pieces

2. Back – 1 piece

3. Lower back – 1 piece

4. Lower front – 2 pieces

5. Sleeve – 2 pieces

6. Cuff – 2 pieces

7. Hood – 2 pieces

8. Center hood – 1 piece

9. Front facing – 2 pieces

10. Back neckline facing – 1 piece

From interfacing: front facing, back neckline facing

1. Make sure your printer is connected and working properly.

2. Open the purchased PDF file with the patterns.

3. In the print settings window, select A4 paper size.

4. Select orientation “Portrait”.

5. Set the option “Actual Size”.

6. Choose “Single-sided printing” and click “Print”.

If you experience any difficulties with printing, please contact our support service: This email address is being protected from spambots. You need JavaScript enabled to view it..

1. Fuse the front facing and back neckline facing with interfacing. Fuse the area for buttonholes on the hood. Fuse the seam allowance along the front edge under the zipper.

2. Attach the side hood piece to the center hood piece and overlock the seams. Topstitch the seam allowances onto the center piece. Mark the buttonhole positions and sew the buttonholes on the hood. Fold the outer hood allowance to the wrong side, turn under, and topstitch onto the hood.

3. Place the front pieces right sides together and align the edges, measuring the length of the front edges. Attach the zipper to the front edge.

4. Sew the shoulder seams of the hoodie. Overlock the seams and press them toward the back.

5. Sew the shoulder seams of the facing and front facing pieces. Overlock the outer edges of the facings. Place the front facing onto the right side of the front piece, right sides together, and stitch along the front edge and neckline, inserting the hood between them. Stitching is done from the front side. Clip the seam allowances at curved areas. Turn the facing to the wrong side and press. Topstitch along the front edge 0.5 cm from the zipper.

6. Set in the sleeves into the open armholes. Sew and overlock the side seams and sleeve seams simultaneously.

7. Sew the cuff into a ring, leaving an opening for the elastic. Fold the cuff in half lengthwise, right side out, and attach it to the sleeve. Overlock the seam.

8. Sew the side seams of the lower back and front pieces. Press the seams open. Attach the upper edge of the lower front piece to the hoodie. Finish the corners of the lower piece. Turn under the inner edge and topstitch it into the upper seam.

9. On the lower front pieces, place the snaps according to the markings (depending on the child’s gender, the top part of the snap may be on the left or right side). Insert the cord into the hood buttonholes and attach the cord ends. Insert elastic into the cuffs and secure it.