Shearling Jacket Sewing Pattern with a Shawl Collar 44708 (Product code: 44708)

Rating:
Height (cm): ℹ️
❌Measure the vertical distance from the floor to the apical point. І
Chest circumference (cm): ℹ️
❌The tape should pass horizontally around the body through the protruding points of the pectoral glands and close on the right side of the chest. І
Waist circumference (cm): ℹ️
❌The tape should run horizontally around the torso at waist level. І
Thigh Circumference (cm): ℹ️
❌The tape is applied to the buttock points. The tape should run horizontally around the torso, in front along a flexible plate applied vertically to the abdomen to account for the protrusion of the abdomen, and close on the right side of the torso. І
Price: 55.00 грн
(1.21 $ / 1.05 €)
Pattern file format: pdf
To print : on A4 sheets
A4 Sheets Required for Printing (Depends on Size): 27-40
Seam allowances: No seam allowances
Pattern language: russian
Quantity:

You can see the available sizes of this model here

Women's shearling jacket sewing pattern in PDF format for printing on A4 sheets featuring a fitted silhouette, an asymmetrical closure, and decorative buckle fasteners. The luxurious shawl collar with faux fur trim adds elegance and highlights the classic winter style of the garment.

Princess seams create a flattering fit, while the fur trim on the collar, cuffs, and edges enhances the cozy and stylish look. The asymmetrical fastening gives the design a distinctive character, making this jacket a beautiful addition to a seasonal wardrobe.

The PDF sewing pattern is designed for printing on standard A4 sheets and assembling at full size. The model is suitable for faux shearling and similar materials with a fur backing.

Details on processing faux fur and leather can be found at the links:

Working with faux fur

Working with leather

Fabric Recommendations

This model is designed for faux shearling fabric. Faux fur with a longer pile is recommended for the collar.

Additional Materials Required

  • Decorative fasteners — 2 pcs.

Seam Allowances

Add the following seam allowances to the pattern:

  • All exposed edges (front edge, garment hem, cuff edge, outer collar edge) — 0 cm.
  • The princess seams of the front and back, as well as the front sleeve seams, are constructed as overlay seams (see detailed instructions).
  • All other seams require a 1.5 cm seam allowance.

Pattern Pieces

Main Fabric:

  • Front side panel — 2 pieces
  • Back side panel — 2 pieces
  • Back center panel — 2 pieces
  • Front yoke — 2 pieces
  • Front center panel — 2 pieces
  • Upper sleeve — 2 pieces
  • Lower sleeve — 2 pieces
  • Cuff — 2 pieces

Contrast Fabric:

  • Collar — 1 piece

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Adjust page orientation. Make sure the correct type is selected (portrait/landscape) so that the pattern details are positioned exactly according to the layout.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Attach the yoke to the center front panel. Spread the seam allowances to both sides and topstitch.

2. Attach the front side panel to the center front panel using an overlay seam.

3. Sew the back princess seams using an overlay seam.

4. Sew the center back seam. Spread the seam allowances to both sides and topstitch.

5. Sew the shoulder and side seams of the shearling jacket. Spread the seam allowances to both sides and topstitch.

6. Sew the front sleeve seam using an overlay seam. Place the sleeve and cuff with the fur sides facing inward and attach the cuff to the sleeve using a closed seam (trim the cuff seam allowance and topstitch the sleeve seam allowance). Sew the elbow seam of the sleeve. Near the cuff attachment seam, clip the elbow seam allowances and topstitch them onto the cuff using a closed seam.

7. Set the sleeves into the armholes, matching the notches. Clip the seam allowances, spread them to both sides of the seam line, and topstitch: the sleeve allowance onto the sleeve, and the armhole allowance onto the back and front.

8. Attach the collar to the garment.

9. Sew a securing stitch 0.1 - 0.2 cm from the edge along the front edge, hemline, and cuff edge. Attach the fastener. Sew a decorative topstitch 2 cm from the edge along the front edge and hemline.

Demo Download
Comments
Write a comment for this product!
Copyright MAXXmarketing GmbH
JoomShopping Download & Support