Skirt sewing pattern 4381 (Product code: 4381)

Rating:
Викрійка спідниці
Zoom image
Викрійка спідниці
Skirt sewing pattern
Patrón de falda
Height (cm): ℹ️
❌Measure the vertical distance from the floor to the apical point. І
Chest circumference (cm): ℹ️
❌The tape should pass horizontally around the body through the protruding points of the pectoral glands and close on the right side of the chest. І
Waist circumference (cm): ℹ️
❌The tape should run horizontally around the torso at waist level. І
Thigh Circumference (cm): ℹ️
❌The tape is applied to the buttock points. The tape should run horizontally around the torso, in front along a flexible plate applied vertically to the abdomen to account for the protrusion of the abdomen, and close on the right side of the torso. І
Price: 48.00 грн
(1.15 $ / 0.96 €)
Seam allowances: No seam allowances
Pattern file format: pdf
To print : on A4 sheets
Pattern language: russian
Quantity:

You can see the available sizes of this model here

Skirt sewing pattern 4381 — a modern design with elegant shaped seams that emphasize femininity and add dynamic lines to the silhouette. Thanks to the carefully planned cut, the skirt fits perfectly, creating a stylish and refined look. The pattern is suitable for dense fabrics made of natural or blended fibers, ensuring comfort and a flawless fit.

Included:

Pattern for the upper part of the skirt

Pattern for the middle part of the skirt

Pattern for the side part of the skirt

Pattern for the insert

Pattern for the facing

For sewing this model we recommend dense fabrics made of natural or blended fibers.

You will also need: fusible interfacing; invisible zipper.

Add seam allowances to the pattern: all seams – 1 cm, hem allowance for the skirt bottom – 2 cm.

Cut:

From the main fabric:

1. Upper part of the skirt – 2 pieces

2. Middle part of the skirt – 2 pieces

3. Side part of the skirt – 2 pieces

4. Insert – 2 pieces

5. Facing – 2 pieces

From fusible: facing.

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

When joining the pieces, pay attention to the notches – they must match.

1. Reinforce the skirt facings with fusible interfacing.

2. Assemble the front panel: stitch the insert to the side part of the skirt. Finish the seam, press it towards the side part, and topstitch.

3. Join the upper and middle parts of the skirt. Finish the seam, press it towards the upper part, and topstitch.

4. Join the middle and side parts of the skirt. Finish the seam, press it towards the middle part, and topstitch.

5. Assemble the back panel in the same way as the front panel.

6. Finish the left side edge. Stitch the left side seam from the zipper mark downwards. Press the seam open, pressing the allowance for the zipper. Place the invisible zipper under the allowances and stitch so that the teeth are not visible.

7. Stitch and finish the right side seam of the skirt. Press the seam towards the back.

8. Stitch and press open the side seam of the facings. Finish the lower edge. Place the facings with the upper edge of the skirt, right sides together, and stitch. Understitch the seam allowance onto the facings 0.2 cm from the seam. Turn the facings to the wrong side and press.

9. Press the hem allowance of the skirt to the wrong side, fold, and stitch.

Demo Download
Comments
Copyright MAXXmarketing GmbH
JoomShopping Download & Support