Recommended seam allowances: Hem allowance for the bottom of the product – 1.5 cm, other seams – 1 cm.
1. Duplicate the trims, cuffs, top collar and inner stand with adhesive interlining.
2. Fold the top collar with the bottom face inward. Stitch the ends and collar flap. Trim the seams. Turn the collar out, straighten and iron. Place the stand pieces face to face, place the finished collar between them, align the notches and stitch, while turning the ends of the stand. Start and end the stitch strictly at the marked seam line for setting in the stand. Turn out the finished collar and iron it.
3. Sew the darts on the back. Iron the darts to the middle seam. Sew the center back seam. Overcast and iron the seam. Sew the chest dart on the left side of the front. Iron the dart up. On the right shelf, between the marks along the side, lay a line with loosely tightened stitches and assemble the assembly.
4. Place the small strips face to face and grind the parts along the concave cut. Turn the strips right side out and iron them. Sew the outer part of the small strip to the left shelf. Iron the seam towards the strip. Fold the inner part of the small strip inside and stitch it into the stitching seam.
5. Sew the outer part of the large strip to the right shelf. Place the pieces of the large plank face to face along the outer edge. Place the left shelf between the slats and stitch the parts. Fold the inner large strip to the wrong side and iron it. Fold the open cut of the inner large strip and stitch it into the stitching seam.
6. Sew the side part to the shelf. Overcast the seam and iron it to the back.
7. Sew shoulder seams and right side seam. Overcast the seams and press to the back. Stitch the left side seam from the armhole to the notch. Press the seam and sweep it over. Sew in a zipper.
8. Sew the top stand with collar into the neckline, tuck the open edge of the bottom stand and stitch it into the stitching seam of the top stand. Place a finishing stitch along the stand and collar.
9. Stitch, overcast and iron the sleeve sections to the notch. Sew in the sleeves, placing them at the edges.
10. Fold the cuffs in half and stitch the short sides and the area to the notch. Cut the allowance near the notch. Turn the cuffs inside out and iron them. Sew the outside of the cuff to the sleeve. Fold the inside of the cuff over and stitch into the stitching seam.
11. Overcast the bottom of the product, iron it on the wrong side and topstitch.
12. Sew the loops on the cuffs and sew on the buttons. Sew buttons on the shelf.