Skirt sewing pattern model 4383 (Product code: 4383)

Included:

Pattern for the back yoke

Pattern for the front yoke

Pattern for the back facing

Pattern for the front facing

Pattern for the upper flounce

Pattern for the middle flounce

Pattern for the lower flounce

Recommended fabrics for sewing this pattern: lightweight silk fabrics made of natural or blended fibers.

You will also need: fusible interfacing, invisible zipper.

Add seam allowances to the pattern: all seams – 1 cm. Hem allowance for the garment bottom – 2 cm.

Cut:

From the main fabric:

1. Back yoke – 1 piece

2. Front yoke – 1 piece

3. Back facing – 1 piece

4. Front facing – 1 piece

5. Upper flounce – 1 piece

6. Middle flounce – 1 piece

7. Lower flounce – 1 piece

From fusible: back and front facings.

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

When joining the pieces, pay attention to the notches – they must match.

1. Reinforce the skirt facings with fusible interfacing.

2. Stitch the darts on the back yoke. Press the darts towards the center of the piece.

3. Stitch the left side seam from the zipper mark downwards. Press the seam open, pressing the allowance for the zipper, and finish. Place the invisible zipper under the allowances and stitch so that the teeth are not visible.

4. Stitch and finish the right side seam of the skirt. Press the seam towards the back.

5. Stitch and press open the side seam of the facings. Finish the lower edge. Place the facings with the upper edge of the skirt, right sides together, and stitch. Understitch the seam allowance onto the facing 0.2 cm from the seam. Turn the facings to the wrong side and press.

6. Stitch the seams of the flounces. Press the seams to the left side and finish.

7. Along the upper edge of the upper flounce, sew a line with slightly loose stitches. Gather the edge to the length of the lower edge of the skirt yokes, distributing the gathers evenly. Attach the upper flounce to the yokes. Press the seam upwards and finish.

8. Along the upper edge of the middle flounce, sew a line with slightly loose stitches. Gather the edge to the length of the lower edge of the upper flounce, distributing the gathers evenly. Attach the middle flounce to the upper flounce. Press the seam upwards and finish.

9. Along the upper edge of the lower flounce, sew a line with slightly loose stitches. Gather the edge to the length of the lower edge of the middle flounce, distributing the gathers evenly. Attach the lower flounce to the middle flounce. Press the seam upwards and finish.

10. Press the hem allowance of the skirt to the wrong side, fold, and stitch.