Blouse pattern with pleats (Product code: 9060)

Rating:
Blouse pattern with pleats
Zoom image
Blouse pattern with pleats
Blouse pattern with pleats
Height (cm): ℹ️
❌Measure the vertical distance from the floor to the apical point. І
Chest circumference (cm): ℹ️
❌The tape should pass horizontally around the body through the protruding points of the pectoral glands and close on the right side of the chest. І
Waist circumference (cm): ℹ️
❌The tape should run horizontally around the torso at waist level. І
Thigh Circumference (cm): ℹ️
❌The tape is applied to the buttock points. The tape should run horizontally around the torso, in front along a flexible plate applied vertically to the abdomen to account for the protrusion of the abdomen, and close on the right side of the torso. І
Price: 49.00 грн
Seam allowances: No
Pattern file format: pdf
To print : on A4 sheets
Pattern language: russian
Quantity:

The pleated blouse is a stylish and elegant addition to any wardrobe. Featuring short sleeves, a turn-down collar, and neat vertical pleats at the front, this design creates a refined silhouette and adds sophistication to your look. The pattern is available in PDF format for printing on A4 sheets, ensuring ease of use. Perfect for sewing with lightweight fabrics such as silk, cotton, or viscose. Create a unique garment yourself with our sewing pattern!

The pattern set includes:

Back pattern

Pattern of a shelf

Collar pattern

Pattern of the stand

Sleeve pattern

Recommendations for choosing fabric: double-sided blouse fabric made from natural or mixed fibers (silk, viscose, P\E).

You also need: adhesive interlining, 5 buttons.

Cut:

Main fabric:

1. Back - 2 parts
2. Shelf - 2 parts
3. Sleeve – 2 parts
4. Collar – 2 parts
5. Stand – 2 parts

From adhesive:

1. Collar – 1 piece
2. Stand – 1 piece
3. Side strip – 2 parts

If you purchased patterns in PDF format from our website and want to print them yourself, you need to set up your printer correctly. In order for the patterns to be displayed on paper with quality and real size, perform the following steps:

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

WHEN STITCHING PARTS, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

1. Use adhesive interlining to duplicate the one-piece placket, top collar and inner stand.

2. Fold the top collar with the bottom face inward. Sew down the ends and flap of the collar. Trim the seams. Turn the collar out, straighten and iron. Place the stand pieces face to face, place the finished collar between them, align the notches and stitch, while turning the ends of the stand. Start and end the stitch strictly at the marked seam line for setting in the stand. Turn out the finished collar and iron it.

3. On the shelf, along the marked lines, place the first fold with the front side inward. Sew the fold from the wrong side from the neckline to the cross mark. Process the remaining 3 folds in the same way. Iron the folds to the middle of the front, as shown in the picture.

4. Sew darts on the shelves. Iron the waist darts towards the middle of the front, and the chest darts up. Sew the darts on the back. Iron the darts to the middle seam. Sew the center back seam. Overcast and iron the seam.

5. Sew shoulder and side seams. Overcast the seams and press to the back. Fold the planks right side out twice and place a finishing stitch along the inner edge of the plank.

6. Sew the top stand with collar into the neckline, tuck the open edge of the bottom stand and stitch it into the stitching seam of the top stand. Place a finishing stitch along the stand and collar.

7. Stitch and overcast sleeve sections. Sew in the sleeves, placing them at the edges.

8. Overcast the bottom of the product and sleeves, iron on the wrong side and topstitch.

9. Sew the loops on the right shelf, and sew buttons on the left.

Demo Download
Comments
Copyright MAXXmarketing GmbH
JoomShopping Download & Support