Zipper hoodie pattern (Product code: 4230)

The pattern set includes:

Front pattern

Back pattern

Lower back part pattern

Lower front part pattern

Sleeve pattern

Cuff pattern

Front waistband pattern

Back waistband pattern

Collar pattern

Recommended fabrics: dense knit fabrics, footer, fleece.

You will also need: fusible interfacing; a non-separating zipper (zipper length is indicated on the front pattern); elastic band 2.5 cm wide.

Recommended seam allowances: all seams — 1 cm; armhole, sleeve cap, neckline, collar — 0.7 cm.

Number of cutting pieces required:

From main fabric:

1. Front — 2 pieces

2. Back — 1 piece

3. Lower back part — 1 piece

4. Lower front part — 1 piece

5. Sleeve — 2 pieces

6. Cuff — 2 pieces

7. Front waistband — 1 piece

8. Back waistband — 1 piece

9. Collar — 2 pieces

From interfacing: upper collar

1. Make sure your printer is connected and working properly.

2. Open the purchased PDF file with the patterns.

3. In the print settings window, select A4 paper size.

4. Select orientation “Portrait”.

5. Set the option “Actual Size”.

6. Choose “Single-sided printing” and click “Print”.

If you experience any difficulties with printing, please contact our support service: This email address is being protected from spambots. You need JavaScript enabled to view it..

1. Fuse the upper collar with interfacing. Fuse the seam allowance along the front edge under the zipper.

2. Overlock the front edge on the front pieces. Measure the length of the edges and insert the zipper so that the teeth are visible. Stitch a decorative line along the edge 0.5 cm from the zipper.

3. Sew the upper and lower front parts together. Overlock the seam and press it toward the lower front part.

4. Sew the upper and lower back parts together. Overlock the seam and press it toward the lower back part.

5. Sew and overlock the shoulder seams. Press the seams toward the back.

6. Place the collar pieces right sides together and stitch along the ends and outer edge. Trim the corners, turn the collar right side out, and press. Sew the upper collar into the neckline. Fold the lower collar and topstitch it into the seam of the upper collar attachment.

7. Sew the side seams. Overlock and press the seams open.

8. Sew the side seams of the front and back waistbands, leaving an opening for the elastic. Fold the waistband in half lengthwise, right side out, and attach it to the bottom edge of the sweatshirt. Overlock the seam.

9. Sew and overlock the sleeve seams. Sew the cuff seam, leaving an opening for the elastic. Fold the cuff in half lengthwise, right side out, and attach it to the sleeve. Overlock the seam.

10. Set in the sleeves into the armholes. Overlock the sleeve attachment seam from the armhole side.

11. Insert elastic into the openings on the waistband and cuffs and secure it.