Baby Bonnet Pattern 2 (Product code: 387122)

The bonnet pattern set includes:

Side piece pattern of Bonnet 2

Center piece pattern of the bonnet

Tie strap pattern of the bonnet

The image below shows the assembled pattern you will get after printing and taping the A4 sheets together:

Recommended seam allowances: 1 cm for all seams.

Suitable for infants from 0 to 6 months. For warm or lightweight bonnets, use 0.5 cm seam allowances and finish the seams on the right side. Topstitching is typically used on warm bonnets or bonnets worn over inner layers.

For higher sewing quality, you can use 0.5 cm seam allowances. Sew the bonnet on an overlock machine with a 0.5 cm seam width without using a regular straight stitch machine.

Bonnet for girls can be decorated with lace, bows, or satin ribbons.

Required fabric pieces:

From main fabric:

1. Side piece of Bonnet 2 – 2 pieces

2. Center piece of Bonnet 2 – 1 piece

3. Tie strap of Bonnet 2 – 1 piece

Recommended fabrics: soft stretch knit fabrics.

You will also need: lace, bias tape.

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

When sewing parts, pay attention to the notches - they must match!

Recommended fabrics: soft stretch knit fabrics.

You will also need: lace, bias tape.

1. Stitch the side pieces to the center piece of Bonnet 2. Overlock the seams and press them toward the side pieces. Topstitch the seam allowances to the side pieces at 0.2 cm from the seam. Place the lace with its wrong side facing the right side of the bonnet and stitch the inner edge of the lace at 0.2 cm from the edge, slightly easing the bonnet. Bind the outer edge of the bonnet together with the lace using bias tape.

2. Stitch the inner edge of the tie strap to the wrong side of the bonnet. Fold the outer edge under and stitch it into the seam. Tie small knots at the ends of the ties.