Jacket Sewing Pattern 44709 (Product code: 44709)

Rating:
Height (cm): ℹ️
❌Measure the vertical distance from the floor to the apical point. І
Chest circumference (cm): ℹ️
❌The tape should pass horizontally around the body through the protruding points of the pectoral glands and close on the right side of the chest. І
Waist circumference (cm): ℹ️
❌The tape should run horizontally around the torso at waist level. І
Thigh Circumference (cm): ℹ️
❌The tape is applied to the buttock points. The tape should run horizontally around the torso, in front along a flexible plate applied vertically to the abdomen to account for the protrusion of the abdomen, and close on the right side of the torso. І
Price: 55.00 грн
(1.21 $ / 1.05 €)
Pattern file format: pdf
To print : on A4 sheets
A4 Sheets Required for Printing (Depends on Size): 40-55
Seam allowances: No seam allowances
Pattern language: russian
Quantity:

You can see the available sizes of this model here

PDF sewing pattern for a fur jacket printable on A4 sheets helps you create a comfortable outerwear piece you'll want to wear throughout the cold season. The oversized hood, wrap-front design, and waist belt create a modern silhouette that feels both relaxed and elegant.

The soft fur texture gives the model a cozy appearance, while the minimalist design makes it easy to combine with a variety of wardrobe styles. Thanks to the loose fit, the jacket is comfortable for everyday wear, and the belt allows you to emphasize the waist and create a feminine silhouette.

The pattern is designed for sewing with faux fur and other pile fabrics. The PDF format is intended for printing on standard A4 sheets and assembling at full size.

Details on processing faux fur and leather can be found at the links:

Working with faux fur

Working with leather

Recommended Materials

Faux fur is recommended for sewing this model.

You will also need

Lining fabric, faux leather.

Seam Allowances

Add the following seam allowances to the pattern: 1.5 cm for all seams. Hem allowance for the garment and sleeves — 4 cm.

Cutting Layout

From faux fur:

  • Back — 1 piece
  • Front — 2 pieces
  • Sleeve — 2 pieces
  • Belt — 1 piece
  • Back neckline facing — 1 piece
  • Belt loop — 1 piece
  • Pocket facing — 2 pieces

From lining fabric:

  • Back — 1 piece
  • Front — 2 pieces
  • Sleeve — 2 pieces
  • Upper pocket bag — 2 pieces
  • Lower pocket bag — 2 pieces

Attention: the front and back lining pieces are cut excluding the width of the front facings and the back neckline facing respectively.

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Adjust page orientation. Make sure the correct type is selected (portrait/landscape) so that the pattern details are positioned exactly according to the layout.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Attach the pocket facing to the lower pocket bag. Place the pocket bag with facing onto the right side of the back piece, matching the notches. Place the upper pocket bag onto the front piece with the right side facing down and stitch. Turn the seam allowance and topstitch it onto the pocket bag.

2. Sew the shoulder seams.

3. Sew the center seam of the hood. Clip the seam allowance at the base of the neck. Set the hood into the neckline.

4. Set the sleeves into the armholes.

5. Sew the sleeve seam and side seam together in one continuous seam, including the pocket bags.

6. Cut belt loops from faux leather. Fold the belt loops into three layers and topstitch the long edges 0.2 cm from the edge. Topstitch the loops onto the side seams according to the markings. Tip: for greater convenience, it is recommended to topstitch an additional loop onto the edge of the right front from the right side at the level of the side loops.

7. Attach the back neckline facing to the front facings. Sew the center seam of the inner hood. Clip the seam allowance at the base of the neck. Set the hood into the neckline of the facing. Press the integrated facing to the wrong side. Secure the seam allowances of the hood center seams together.

8. Cut two ties from lining fabric, each 40 cm long and 4 cm wide. Press the ties lengthwise in half with the right side out. Unfold and press the long edges toward the center fold line. Fold the tie lengthwise again and topstitch 0.1 cm from the edge. Attach the ties to the left facing and to the right side seam of the lining at waist level.

9. Sew the lining pieces together, leaving an opening in the left sleeve seam for turning. Place the lining and jacket right sides together and stitch to the inner edges of the facings and the back neckline facing. Stitch the lower front corner exactly along the marked hem fold line. Trim the seam allowances at the lower front corners. Turn under the lining sleeves and attach them to the sleeve hem allowance of the jacket.

10. Attach the lining to the bottom edge of the jacket. Turn the jacket right side out through the opening in the sleeve, straighten the seams, and close the opening in the sleeve.

11. Fold the belt right sides together and stitch around the outer edges, leaving an opening in the center of the upper belt seam. Turn the belt right side out and close the opening.

Demo Download
Comments
Write a comment for this product!
Copyright MAXXmarketing GmbH
JoomShopping Download & Support