Pattern of a blouse with ties on the sleeves (Product code: 9067)

Included:

Pattern of the central part of the back

Pattern for the side back

Pattern of a shelf

Pattern for the side part of the shelf

Pattern for selection

Collar pattern

Pattern of the stand

Sleeve pattern

Cuff pattern

Cut:

Main fabric:

1. Central part of the back - 2 parts

2. Side part of the back - 2 parts

3. The central part of the shelf - 2 parts

4. Side part of the shelf - 2 parts

5. Sleeve – 2 parts

6. Collar – 2 parts

7. Stand – 2 parts

8. Cuff – 2 parts

9. Picking – 2 parts

From adhesive:

1. Collar – 1 piece
2. Stand – 1 piece
3. Collar – 2 parts
4. Cuff – 2 parts

If you purchased patterns in PDF format from our website and want to print them yourself, you need to set up your printer correctly. In order for the patterns to be displayed on paper with quality and real size, perform the following steps:

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

1. Use adhesive interlining to duplicate the hem, the cuffs between the notches, the top collar and the inner stand.
2. Fold the top collar with the bottom face facing inward. Stitch the ends and collar flap. Trim the seams. Turn the collar out, straighten and iron. Place the stand pieces face to face, place the finished collar between them, align the notches and stitch, while turning the ends of the stand. Start and end the stitch strictly at the marked seam line for setting in the stand. Turn the finished collar inside out and iron it.
3. Sew darts on the details of the shelf. Iron the darts on the central part towards the middle of the front, on the side – towards the side seam. Topstitch the darts. Sew raised edges on the shelf. Overcast the seams, press to the side seam and topstitch.
4. Sew the darts on the back. Iron the darts to the middle seam. Stitch the raised edges on the back. Overcast the seams, press to the side seam and topstitch. Stitch the middle section of the back. Iron the seam to the left side, overcast and topstitch.
5. Sew shoulder seams. Overcast the seams and press to the back. Overcast the outer edge of the hem. Place the edging on the front side of the shelf, right side down, and stitch along the edge and neckline. Turn the hem right side out, iron and sew a finishing stitch. Attach the hem to the shoulder seam, and fasten the open sections of the neckline together. Sew side seams. Overcast the seams and press to the back.
6. Sew the top stand with collar into the neckline, tuck the open edge of the bottom stand and stitch it into the stitching seam of the top stand. Place a finishing stitch along the stand and collar.
7. Cut the bias tape to process a sleeve cut of 19*3 cm. Process the cut on the sleeve as follows: lay the sleeve along the cut line in one straight line, edge the cut with bias tape. The width of the edging is 0.7 cm.
8. Stitch and overcast sleeve sections. Fold the cuffs face to face and stitch along the contour, leaving the area along the upper edge between the notches unstitched. Notch the allowances near the marks. Turn the cuffs inside out and iron them. Sew cuffs to sleeves. Sew the cuffs along the contour. Sew in the sleeves, placing them at the edges.
9. Overcast the bottom of the product, iron it on the wrong side and topstitch.
10. Sew the loops on the right shelf and sew buttons on the left.