Skirt pattern 4385 (Product code: 4385)

The set of patterns consists of:

Back pattern

Front yoke pattern

Back facing pattern

Front facing pattern

Upper back flounce pattern

Upper front flounce pattern

Lower back flounce pattern

Lower front flounce pattern

Recommended fabrics for this pattern: fabrics made of natural fibers or with added synthetic fibers.

You will also need: fusible interfacing; invisible zipper.

Add the following seam allowances: all seams – 1 cm. Hem allowance – 2 cm.

Cutting:

From main fabric:

1. Back yoke – 1 piece

2. Front yoke – 1 piece

3. Back facing – 1 piece

4. Front facing – 1 piece

5. Upper back flounce – 1 piece

6. Upper front flounce – 1 piece

7. Lower back flounce – 1 piece

8. Lower front flounce – 1 piece

From fusible: back and front facings.

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

When sewing the pieces, pay attention to the notches – they must match!

1. Reinforce the skirt facings with fusible interfacing.

2. Stitch the darts on the back yoke. Press the darts toward the center of the piece.

3. Back panel assembly: along the upper edge of the upper flounce, sew a row of loose stitches. Gather the edge to the length of the lower edge of the back yoke, distributing the gathers evenly. Attach the upper flounce to the yoke. Press the seam upward and overcast.

4. Along the upper edge of the lower flounce, sew a row of loose stitches. Gather the edge to the length of the lower edge of the upper flounce, distributing the gathers evenly. Attach the lower flounce to the upper flounce. Press the seam upward and overcast.

5. Front panel assembly is similar to the back panel assembly.

6. Stitch the left side seam from the zipper mark downwards. Press the seam open, pressing the allowance for the zipper, and overcast. Place the invisible zipper under the allowances and stitch so that the teeth are not visible.

7. Align the skirt along the right side edge and trim it straight. Stitch and overcast the right side seam. Press the seam toward the back.

8. Stitch and press open the side edge of the facings. Overcast the lower edge. Place the facings to the upper edge of the skirt, right sides together, and stitch. Topstitch the facing seam allowance 0.2 cm from the seam. Turn the facings to the wrong side and press.

9. Press the hem allowance of the skirt to the wrong side, fold, and topstitch.