Pattern of a blouse with pleats on the shelf (Product code: 9066)

The pattern set includes:

Back pattern

Pattern of a shelf

Pattern of the stand

You also need: adhesive pad; 7 buttons.

Main fabric:

1. Back – 1 piece

2. Shelf - 2 parts

3. Stand – 2 parts

From adhesive:

one-piece bar, top post.

If you purchased patterns in PDF format from our website and want to print them yourself, you need to set up your printer correctly. In order for the patterns to be displayed on paper with quality and real size, perform the following steps:

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

1. Duplicate the one-piece shelf strips and the top stand with an adhesive gasket.
2. Place the stand pieces right sides inward and stitch along the outside, starting and ending the stitching exactly at the stand stitching line. Cut the allowances on the curves, turn the stand right side out, and iron.
3. Lay and iron the folds on the shelf according to the markings. Please note: the depths of the folds are directed towards the board, and the ribs are directed towards the side seam. Iron the one-piece placket 2 times on the wrong side and stitch 0.1 cm from the inner fold.
4. Stitch the shoulder sections of the blouse. Press the seams to the back and overcast.
5. Sew the outer stand into the neckline, tuck the open edge of the inner stand and stitch it into the stitching seam.
6. Cut a bias tape from the main fabric 4.5 - 5.0 cm wide and equal to the length of the armhole. Iron the binding along the middle with the right side facing out, fold it with the right side of the armhole and stitch. Fold the binding to the wrong side and stitch it onto the shelf 0.1 cm from the fold.
7. Stitch the side sections of the blouse. Press the seams to the back and overcast.
8. Iron the bottom of the product to the wrong side, fold and stitch.
9. Sew the loops on the right shelf and sew buttons on the left shelf.