Pattern of a sleeveless blouse (Product code: 9068)

Included:
Pattern of the upper back Back yoke pattern
Pattern of the lower back
Pattern of the upper part of the shelf
Pattern of the bottom part of the shelf
Shelf yoke pattern
Cut:
From the main fabric:
1. Upper part of the back - 2 parts
2. Lower back - 1 piece
3. Upper part of the shelf - 2 parts
4. Bottom of the shelf - 2 parts
From finishing fabric:
1. Back yoke - 1 piece
2. Shelf yoke - 2 parts

If you purchased patterns in PDF format from our website and want to print them yourself, you need to set up your printer correctly. In order for the patterns to be displayed on paper with quality and real size, perform the following steps:

1. Make sure your printer is connected to your computer and working properly.

2. Open the PDF file with the patterns that you purchased from our site.

3. In the print settings window, select A4 paper size, which corresponds to the standard paper size in most countries of the world.

4. Select "Book" orientation. This will ensure that the patterns are positioned correctly on the page.

5. Set the "Real size" option. This will ensure the exact size of the patterns and their display on the paper according to the dimensions specified in the file.

6. Select the "One-Sided Print" option. Make sure all the print options meet your needs, then click the Print button to start printing.

If you have any difficulties with printing patterns, please contact our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it..

1. From the main fabric, cut a 4 cm wide bias tape for the flounces. The length of the tape is indicated on the patterns. Overcast one side with a rolled seam. Along the edge of the other side of the binding, sew a line with loosely tightened stitches and assemble the assembly.
2. Stitch the darts on the top of the back. Iron the darts towards the middle of the back. Sew the center back seam. Overcast and iron the seam.
3. Along the lower edge of the upper part of the shelf, between the marks, lay a line with loosely tightened stitches and assemble the assembly.
4. Sew the yoke parts along the side seam. Overcast the seam and press to the back. Sew a flounce to the bottom edge of the yoke.
5. Stitch the shoulder sections of the upper parts of the back and front. Overcast the seams and press to the back. Sew a flounce to the armhole. Sew the side seam of the upper back and front. Overcast the seam and press to the back.
6. Sew the side seams of the lower parts of the back and front, leaving an unstitched area in the left side seam from the bottom up, 5 cm long. Overcast the right seam and iron it onto the back, overcast the left seam and iron it.
7. Sew the top and bottom of the blouse to the yoke. Overcast the seams and press onto the yoke.
8. Sew loops on the left side of the blouse. Sew the flounce along the contour of the blouse. Start and finish sewing the flounce from the cut in the side seam. Stitch the side seam to the end. On the right shelf, sew hooks under the flounce.