Men’s work robe sewing pattern (Product code: 1520)

Rating:
Викрійка чоловічого робочого халата
Zoom image
Викрійка чоловічого робочого халата
Patrón de bata de trabajo masculina
Men’s work robe sewing pattern
Height (cm).: ℹ️
❌Measured vertically from the floor to the top point of the head. І
Chest circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso through the nipple points and close on the right side of the chest. І
Waist circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso at the waistline level. І
Thigh Circumference (cm).: ℹ️
❌The tape is placed on the most prominent points of the buttocks. It should pass horizontally around the torso, in front – along a flexible plate applied vertically to the abdomen to account for its protrusion, and close on the right side of the torso. І
Price: 48.00 грн
(1.10 $ / 0.96 €)
Seam allowances: No seam allowances
Pattern file format: pdf
To print : on A4 sheets
Pattern language: russian
Quantity:

You can see the available sizes of this model here

Sewing pattern for a straight-cut robe with a hidden placket fastening on 6 buttons. Back vent, adjustable tab with buttons at the waistline. Stand collar. Long set-in sleeves. Three patch pockets on the front panels: two lower and one upper.

The set of sewing patterns consists of:

Tab pattern

Back panel pattern

Lower pocket pattern

Upper pocket pattern

Front panel pattern

Placket pattern

Collar stand pattern

Sleeve pattern

Fabric recommendations: cotton calico, bleached twill.

Cutting:

Tab — 2 pieces

Back panel — 2 pieces

Lower pocket

Upper pocket — 1 piece

Front panel — 2 pieces

Placket — 1 piece

Collar stand — 2 pieces on fold

Sleeve — 2 pieces

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

Sewing a men’s work robe

  1. Preparing pieces: Cut front panels, back, sleeves, collar stand, placket, tab and pockets.
    Reminder: the pattern has no seam allowances, so add 1 cm to all seams and 3 cm to the hem and sleeves.
  2. Sew patch pockets: two lower on the front panels and one upper on the left front.
  3. Stitch shoulder seams, then side seams. Leave the back vent. Attach the tab at the waistline and secure with buttons.
  4. Sew sleeves along their length, set them into the armholes.
  5. Assemble the collar stand and attach to the neckline.
  6. Finish the placket, make a button closure with 6 buttons.
  7. Hem the robe, finish sleeve hems, check seam strength.
Demo Download
Comments
Copyright MAXXmarketing GmbH
JoomShopping Download & Support