Men’s work robe pattern 1528 (Product code: 1528)

Rating:
Patrón de bata de trabajo masculina
Zoom image
Patrón de bata de trabajo masculina
Викрійка чоловічого робочого халата
Men’s work robe pattern
Height (cm).: ℹ️
❌Measured vertically from the floor to the top point of the head. І
Chest circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso through the nipple points and close on the right side of the chest. І
Waist circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso at the waistline level. І
Thigh Circumference (cm).: ℹ️
❌The tape is placed on the most prominent points of the buttocks. It should pass horizontally around the torso, in front – along a flexible plate applied vertically to the abdomen to account for its protrusion, and close on the right side of the torso. І
Price: 25.00 грн
(0.58 $ / 0.50 €)
Pattern file format: pdf
To print : on A4 sheets
A4 Sheets Required for Printing (Depends on Size): 38-76
Seam allowances: No seam allowances
Pattern language: russian
Quantity:

You can see the available sizes of this model here

Men’s work robe sewing pattern with a straight silhouette slightly flared towards the hem. Central button fastening. Turn-down collar. Long set-in sleeves with cuffs. Two lower patch pockets and one upper patch pocket on the front. Back with a waistband tab at the waistline.

Recommended fabrics for this model: blended fabrics with crease‑resistant and water‑repellent finish.

Cutting:

Waist tab — 1 piece

Lower pocket — 2 pieces

Upper pocket — 1 piece

Back — 1 piece on fold

Front — 2 pieces

Facing — 2 pieces

Under collar — 1 piece on fold

Cuff — 2 pieces on fold

Sleeve — 2 pieces

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

Sewing process of men’s work robe

  1. Cut all pieces according to the pattern: back on fold, fronts, sleeves, collar, cuffs, pockets, facings, and waistband tab.
  2. Attach patch pockets: two lower on the fronts and one upper on the chest.
  3. Sew shoulder seams and press.
  4. Set in sleeves, sew side seams and sleeve seams.
  5. Sew side seams of the robe.
  6. Sew upper and under collar, turn and press, attach to neckline.
  7. Sew facings to the fronts, form central button fastening.
  8. Fold and sew cuffs to sleeves.
  9. Prepare and attach waistband tab at the back waistline.
  10. Finish hem, press and check seam quality.
Demo Download
Comments
Copyright MAXXmarketing GmbH
JoomShopping Download & Support