Insulated security guard jacket sewing pattern (Product code: 1517)

Rating:
Викрійка утепленої куртки охоронця
Zoom image
Викрійка утепленої куртки охоронця
Patrón de chaqueta de guardia de seguridad acolchada
Height (cm).: ℹ️
❌Measured vertically from the floor to the top point of the head. І
Chest circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso through the nipple points and close on the right side of the chest. І
Waist circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso at the waistline level. І
Thigh Circumference (cm).: ℹ️
❌The tape is placed on the most prominent points of the buttocks. It should pass horizontally around the torso, in front – along a flexible plate applied vertically to the abdomen to account for its protrusion, and close on the right side of the torso. І
Price: 25.00 грн
(0.58 $ / 0.50 €)
Pattern file format: pdf
To print : on A4 sheets
A4 Sheets Required for Printing (Depends on Size): 141-212
Seam allowances: No seam allowances
Pattern language: russian
Quantity:

You can see the available sizes of this model here

Insulated security guard jacket sewing pattern with central concealed zipper fastening and snap button placket. Detachable hood with velcro closure and drawstring. Yokes on back and fronts, epaulettes with snaps. Upper collar made of faux fur with tab, waist volume adjustable with drawstring. Two lower patch pockets with flaps and snaps, two upper welt pockets, plus an inner chest pocket. Set-in sleeves with cuffs and decorative tabs.

Pattern set

  • Hood neckline facing
  • Hood drawstring casing (lining)
  • Hood fastening facing
  • Hood facing
  • Hood side part
  • Hood side part (lining)
  • Hood central part
  • Hood central part (lining)
  • Epaulette
  • Collar tab
  • Upper collar
  • Lower collar
  • Lower pocket facing
  • Lower pocket
  • Lower pocket flap
  • Casing
  • Lower jacket part
  • Cut-off front part
  • Right front placket
  • Left front placket
  • Front yoke
  • Upper pocket facing
  • Upper pocket bag (upper part)
  • Upper pocket bag (lower part)
  • Front central part
  • Front side part
  • Upper sleeve part
  • Lower sleeve part
  • Back
  • Back yoke
  • Sleeve cuff
  • Sleeve cuff tab
  • Upper sleeve part (lining)
  • Lower sleeve part (lining)
  • Back (lining)
  • Front (lining)
  • Pocket bag (lining)

Recommended fabrics: blended cotton fabrics (cotton + polyester) with water-repellent finish. For insulation — synthetic padding, wadding.

Cutting

Main fabric:

  • Hood neckline facing – 1 piece
  • Hood fastening facing – 2 pieces
  • Hood facing – 1 piece on fold
  • Hood side part – 2 pieces
  • Hood central part – 1 piece
  • Epaulette – 4 pieces
  • Collar tab – 2 pieces
  • Lower collar – 1 piece on fold
  • Lower pocket facing – 2 pieces
  • Lower pocket – 4 pieces
  • Lower pocket flap – 4 pieces
  • Casing – 2 pieces
  • Lower jacket part – 1 piece on fold
  • Cut-off front part – 2 pieces
  • Right front placket – 1 piece on fold
  • Left front placket – 1 piece on fold
  • Front yoke – 2 pieces
  • Upper pocket facing – 2 pieces
  • Upper pocket bag (upper) – 2 pieces
  • Upper pocket bag (lower) – 2 pieces
  • Front central part – 2 pieces
  • Front side part – 2 pieces
  • Upper sleeve part – 2 pieces
  • Lower sleeve part – 2 pieces
  • Back – 1 piece on fold
  • Back yoke – 1 piece on fold
  • Sleeve cuff – 2 pieces on fold
  • Sleeve cuff tab – 2 pieces

Lining:

  • Hood casing – 1 piece
  • Hood side part – 2 pieces
  • Hood central part – 1 piece
  • Upper sleeve part – 2 pieces
  • Lower sleeve part – 2 pieces
  • Back – 1 piece on fold
  • Front – 2 pieces
  • Pocket bag lining – 1 piece on fold

Faux fur:

  • Upper collar – 1 piece on fold

Insulation:

  • Hood side part – 2 pieces
  • Hood central part – 1 piece
  • Upper sleeve part – 2 pieces
  • Lower sleeve part – 2 pieces
  • Back – 1 piece on fold
  • Front – 2 pieces

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

Sewing the insulated security guard jacket

Preparation

  • Cut all pieces from main fabric, lining, insulation, and faux fur.
  • Reinforce small parts (plackets, flaps, tabs) with interfacing.
  • Prepare zipper, snaps, velcro tape, and drawstrings.

Hood

  • Sew side and central parts together.
  • Attach casing for drawstring.
  • Finish velcro fastening.
  • Join with lining, turn inside out, and topstitch edges.

Collar

  • Sew lower collar with facing, cut upper collar from faux fur.
  • Join upper and lower collar, insert tab.
  • Attach collar to neckline of jacket.

Front and back

  • Sew yokes with central and side parts of fronts.
  • Make chest welt pockets and lower patch pockets with flaps.
  • Sew side and shoulder seams.
  • Attach back yoke, sew waistband casing for adjustment.

Sleeves

  • Sew upper and lower sleeve parts.
  • Attach cuffs with tabs.
  • Sew sleeves into armholes.

Fastening

  • Sew zipper to front edges.
  • Attach plackets with snaps over zipper.
  • Topstitch for strength.

Lining and insulation

  • Sew lining similar to main jacket.
  • Place insulation between lining and main fabric.
  • Join along edges, leave opening for turning.
  • Turn inside out, topstitch hem and front edges.

Finishing

  • Attach hood with snaps.
  • Install all fastenings.
  • Press and check fit.
Demo Download
Comments
Copyright MAXXmarketing GmbH
JoomShopping Download & Support