Cotton suit sewing pattern (Product code: 1514a15)

Rating:
Cotton suit sewing pattern
Zoom image
Cotton suit sewing pattern
Cotton suit sewing pattern
Cotton suit sewing pattern
Cotton suit sewing pattern
Cotton suit sewing pattern
Height (cm).: ℹ️
❌Measured vertically from the floor to the top point of the head. І
Chest circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso through the nipple points and close on the right side of the chest. І
Waist circumference (cm).: ℹ️
❌The tape should pass horizontally around the torso at the waistline level. І
Thigh Circumference (cm).: ℹ️
❌The tape is placed on the most prominent points of the buttocks. It should pass horizontally around the torso, in front – along a flexible plate applied vertically to the abdomen to account for its protrusion, and close on the right side of the torso. І
Price: 48.00 грн
(1.10 $ / 0.96 €)
Seam allowances: No seam allowances
Pattern file format: pdf
To print : on A4 sheets
Pattern language: russian
Quantity:

You can see the available sizes of this model here

The cotton suit sewing pattern includes:

Sewing pattern for men’s straight trousers with button fastening, attached waistband with belt loops. Two patch pockets on the front panels.

Sewing pattern for a straight-cut jacket with central button closure. Back yoke extending to the front. Turn-down collar. Long two-piece set-in sleeves with buttoned cuffs. Two lower patch pockets and one upper pocket on the front panels.

The set of sewing patterns consists of:

Jacket:

Yoke pattern

Lower pocket pattern

Upper pocket pattern

Front panel pattern

Collar pattern

Upper sleeve pattern

Lower sleeve pattern

Back pattern

Cuff pattern

Trousers:

Pocket pattern

Front panel pattern

Back panel pattern

Fly pattern

Fly facing pattern

Waistband pattern

Belt loop pattern

Recommended fabrics: cotton fabrics with crease‑resistant and water‑repellent finish.

Cutting:

Jacket:

1. Yoke — 1 piece on fold

2. Lower pocket — 2 pieces

3. Upper pocket — 1 piece

4. Front panel — 2 pieces

5. Collar — 1 piece on fold

6. Upper sleeve — 2 pieces

7. Lower sleeve — 2 pieces

8. Back — 2 pieces

9. Cuff — 2 pieces on fold

Trousers:

1. Pocket — 2 pieces

2. Front panel — 2 pieces

3. Fly — 1 piece on fold

4. Fly facing — 1 piece on fold

5. Back panel — 2 pieces

6. Gusset — 2 pieces

7. Waistband — 2 pieces

8. Belt loop — 1 piece

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Choose “Portrait” orientation.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

Sewing a cotton suit

  1. Preparing pieces: Cut all jacket and trouser parts according to the pattern: front panels, back, yoke, sleeves, collar, pockets, waistband, fly, belt loops, etc.
    Reminder: add 1 cm seam allowance to all seams and 3 cm to hems and sleeves.
  2. Jacket: Sew patch pockets (two lower and one upper on the front panels). Join yoke with back and front panels. Stitch shoulder and side seams. Assemble sleeves (upper and lower parts), sew and set into armholes. Attach cuffs with buttons. Assemble and sew the turn-down collar. Make central button closure.
  3. Trousers: Sew patch pockets on the front panels. Join front and back panels. Finish fly and facing. Attach waistband with belt loops. Sew side and inseam seams. Finish trouser hems.
  4. Final finishing: Check seam alignment and fastening strength. Hem jacket and trousers. Press the finished suit.
Demo Download
Comments
Copyright MAXXmarketing GmbH
JoomShopping Download & Support