Sewing pattern for a double‑breasted jacket 44707 (Product code: 44707)

Rating:
Викрійка куртки двобортної
Zoom image
Викрійка куртки двобортної
Patrón de chaqueta cruzada 44707
Patrón de chaqueta cruzada 44707
Sewing pattern for a double‑breasted jacket 44707
Height (cm): ℹ️
❌Measure the vertical distance from the floor to the apical point. І
Chest circumference (cm): ℹ️
❌The tape should pass horizontally around the body through the protruding points of the pectoral glands and close on the right side of the chest. І
Waist circumference (cm): ℹ️
❌The tape should run horizontally around the torso at waist level. І
Thigh Circumference (cm): ℹ️
❌The tape is applied to the buttock points. The tape should run horizontally around the torso, in front along a flexible plate applied vertically to the abdomen to account for the protrusion of the abdomen, and close on the right side of the torso. І
Price: 160.00 грн
(3.52 $ / 3.04 €)
Pattern file format: pdf
To print : on A4 sheets
A4 Sheets Required for Printing (Depends on Size): 18-32
Seam allowances: No seam allowances
Pattern language: russian
Quantity:

You can see the available sizes of this model here

Stylish sewing pattern for a double‑breasted jacket 44707 — a modern design with a stand‑up collar, waistband, and decorative trims. Nine buttons on the front add character, while the structured seams create an elegant silhouette. Suitable for sewing with faux suede and leather, ensuring a precise fit and professional look. The PDF format is easy to print on A4 sheets, and detailed instructions make it accessible even for beginners. A practical yet striking jacket you can create yourself.

Details on processing faux fur and leather can be found at the links:

Working with faux fur

Working with leather

Recommended fabrics for sewing the jacket with this pattern: faux suede; faux leather.

You will also need: fusible interfacing; lining fabric; 9 buttons.

Add seam allowances to the pattern: all seams – 1 cm. Hem allowance – 4 cm.

Cutting layout:

From faux suede:

1. Center back – 2 pieces

2. Side back – 2 pieces

3. Side front – 2 pieces

4. Center front – 2 pieces

5. Upper sleeve – 2 pieces

6. Lower sleeve – 2 pieces

From faux leather:

1. Collar stand – 2 pieces

2. Back yoke – 1 piece

3. Cuff – 2 pieces

4. Waistband – 1 piece

5. Back neckline facing – 1 piece

From lining fabric:

1. Back yoke – 1 piece

2. Center back – 2 pieces

3. Side back – 2 pieces

4. Center front – 2 pieces

5. Side front – 2 pieces

6. Upper sleeve – 2 pieces

7. Lower sleeve – 2 pieces

Attention: front and back lining pieces are cut without the width of facings and back neckline facing.

From fusible: facing, collar stand, back neckline facing.

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Adjust page orientation. Make sure the correct type is selected (portrait/landscape) so that the pattern details are positioned exactly according to the layout.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

When stitching pieces, pay attention to notches — they must match.

Attention: before fusing pieces made of faux suede and leather, test on a scrap piece.

1. Fuse interfacing to facing, collar stand, and back neckline facing.

2. Place collar stand pieces right sides together and stitch along the outer contour. Trim and turn corners. Press the collar stand.

3. Sew the center back seam. Topstitch 0.2 cm. Sew princess seams of the back. Topstitch. Attach the back yoke to the back. Press seam toward yoke and topstitch. Sew princess seams of the front. Topstitch.

4. Sew side seams. Press waistband seam allowances to wrong side and topstitch onto back, front, and facing along markings.

5. Sew shoulder seams.

6. Baste collar stand into neckline of front and back.

7. Sew elbow seam of sleeve. Press allowances toward upper sleeve and topstitch. Sew front seam of sleeve. Spread allowances to sides and fuse. Press cuff in half lengthwise, right side out. Open cuff and stitch into a ring. Attach outer cuff to lower sleeve edge. Press allowances toward cuff and topstitch. Set sleeves into armholes matching notches. Press seam allowances toward garment and topstitch.

8. Sew shoulder seams of facings and neckline facing. Turn facings to right side of front and stitch along neckline, inserting collar stand. Attach lower edges of facings to front along hemline. Turn facings right side out, adjust seams, and press.

9. On lining pieces, sew seams and set sleeves, leaving an opening in the right front sleeve seam. Press allowances. Attach lining to inner edges of facings and neckline facing.

10. Mark and press hem. Stitch lining to hem of sleeves and garment. Turn jacket right side out through sleeve opening. Close sleeve opening.

11. Topstitch along hem, front edges, and collar stand perimeter. On right front and collar stand, work buttonholes; on left front and collar stand, sew buttons. Also sew decorative buttons on right front.

Demo Download
Comments
Write a comment for this product!
Copyright MAXXmarketing GmbH
JoomShopping Download & Support