Jacket sewing pattern model 44702 (Product code: 44702)

Rating:
Jacket sewing pattern model 44702
Zoom image
Jacket sewing pattern model 44702
Jacket sewing pattern model 44702
Jacket sewing pattern model 44702
Jacket sewing pattern model 44702
Jacket sewing pattern model 44702
Height (cm): ℹ️
❌Measure the vertical distance from the floor to the apical point. І
Chest circumference (cm): ℹ️
❌The tape should pass horizontally around the body through the protruding points of the pectoral glands and close on the right side of the chest. І
Waist circumference (cm): ℹ️
❌The tape should run horizontally around the torso at waist level. І
Thigh Circumference (cm): ℹ️
❌The tape is applied to the buttock points. The tape should run horizontally around the torso, in front along a flexible plate applied vertically to the abdomen to account for the protrusion of the abdomen, and close on the right side of the torso. І
Price: 45.00 грн
(0.99 $ / 0.86 €)
Pattern file format: pdf
To print : on A4 sheets
A4 Sheets Required for Printing (Depends on Size): 20-30
Seam allowances: No seam allowances
Pattern language: russian
Quantity:

You can see the available sizes of this model here

Sewing pattern for a women's jacket with a modern silhouette and clean cut lines. The model features a central zipper closure, stand-up collar, and princess seams that ensure a comfortable fit. The sleeves are made of two parts, giving them a distinctive shape. The jacket comes with lining, making it practical for everyday wear. Suitable for sewing with faux leather and other dense fabrics, creating a stylish and functional outerwear piece.

Details on processing faux fur and leather can be found at the links:

Working with faux fur

Working with leather

CUTTING:

From main fabric:

1. Upper collar – 1 piece

2. Lower collar – 1 piece

3. Center back – 2 pieces

4. Side back – 2 pieces

5. Side front – 2 pieces

6. Center front – 2 pieces

7. Facing – 2 pieces

8. Upper sleeve – 2 pieces

9. Lower sleeve – 2 pieces

10. Back neckline facing – 1 piece

From lining fabric:

1. Center back – 2 pieces

2. Side back – 2 pieces

3. Center front – 2 pieces

4. Side front – 2 pieces

5. Upper sleeve – 2 pieces

6. Lower sleeve – 2 pieces

ATTENTION: front and back lining pieces are cut without allowance for facings and back neckline facing respectively.

From fusible:

Facings, collars, back neckline facing.

ATTENTION: before fusing pieces made of faux leather, test on a scrap piece first.

If you purchased a PDF pattern from our site and want to print it yourself, follow these steps:

1. Make sure your printer is connected and working.

2. Open the purchased PDF file with the pattern.

3. In print settings, select A4 paper size.

4. Adjust page orientation. Make sure the correct type is selected (portrait/landscape) so that the pattern details are positioned exactly according to the layout.

5. Set scaling to “Actual Size.”

6. Select “Single-sided printing.”

If you need help, contact us at: This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Fuse the facings, collars, and back neckline facing with interfacing.

2. Stitch the waist darts on the front. Stitch the shoulder darts on the back. Trim dart allowances.

3. Stitch the princess seams of the front.

4. Stitch the princess seams of the back. Stitch the center back seam.

5. Stitch the shoulder and side seams. Attach the upper collar to the neckline of the front and back. Stitch the neckline dart and collar together in one seam.

6. Place the fronts right sides together and align the edges, checking the length of the front edges. Place the zipper right side down on the right side of the front so that the teeth align with the marked seam line (tape lies on the seam allowance) and baste.

7. Stitch the elbow and front seams of the sleeve. Press the sleeve hem. Set in the sleeves into the armholes, matching notches.

8. Stitch and press open the shoulder seams of the facing and neckline facing. Attach the lower collar to the neckline. On the lining pieces, stitch seams and set in sleeves, leaving an opening in the right front sleeve seam. Press lining allowances. Attach the lining to the inner edges of the facings and neckline facing.

9. Place the facing with lining onto the right side of the front, right sides together, pin, and stitch in one seam, catching the zipper, stitching the lower corner, front edge, and upper collar edge. Trim seam allowances at corners. Turn the fronts right side out, straighten seams. Topstitch along the front edge and upper collar edge at 0.5 cm.

10. Mark and press the hem of the jacket. Finish the hem of the sleeves and garment with lining. Turn the jacket right side out through the sleeve opening. Stitch the sleeve opening closed.

Demo Download
Comments
Write a comment for this product!
Copyright MAXXmarketing GmbH
JoomShopping Download & Support