When sewing parts, pay attention to the notches - they must match!
1. Sew the darts on the front. Iron the depths upwards.
2. Cut a diagonal strip from the main fabric, 4 cm wide and equal in length to twice the length of the cut on the front. Iron the strip lengthwise in the middle, unfold it and iron the longitudinal cuts to the marked line. Cut a slit on the front and edge it with the resulting bias tape.
3. Overcast all edges of the patch pocket except the bottom one. Iron the pocket entrance edges to the wrong side and stitch with a double stitch at 0.1 cm and 0.7 cm from the edge. Iron the top and side edges to the wrong side, place them on the front along the markings and stitch with a double stitch at 0.1 cm and 0.7 cm from the edge.
4. Sew the back parts of the sleeves to the back. Sew the front parts of the sleeves to the front. Press the seam allowances apart and topstitch.
5. Sew the upper edges of the sleeves. Press the seam allowances apart. Sew the lower edges of the sleeves and the side edges in one line. Press the seam allowances apart.
6. Sew the hood pieces together in pairs. On the lower hood, press the stitching seam to the left side and topstitch with a double stitch at 0.1 cm and 0.7 cm. On the upper hood, iron the seam allowances open. Place the hood pieces with the right sides facing inward and stitch along the outer contour, starting and finishing the stitching strictly at the marked line for sewing the hood. Turn the hood right side out, straighten the seam, and iron it.
7. Sew the lower hood into the neck opening, fold the lower open edge of the upper hood and stitch into the sewing seam. Sew a finishing stitch along the edge of the hood at 0.7 cm.
8. Iron the seam allowance of the lower edge of the garment and the sleeve to the wrong side, fold it inward by 0.5 cm and topstitch.